ISPM-15 crating
Wood over 6 mm debarked, heat-treated to a 56 °C core for 30+ minutes or methyl-bromide fumigated, and marked on two faces.
Independent forwarding desk · operated with Juara Holding Group
Destinations & Quotes · Indicative rate card
Teak from Kerobokan, rattan from Seminyak, carved doors from Ubud: budget before you buy, then ask the trade desk for an exact quote.
Quick answer
Bali furniture shipping starts at USD 350–450 per CBM to Australia and USD 400–550 to the USA and EU, with no minimum order. Full containers to the USA run USD 2,500–4,500 (20ft) to USD 4,000–7,000 (40ft), indicative as of 2026.
Rate card · 2026
The canonical rate card. The trade desk confirms final scope on every quote.
| Service | Destination | Indicative price | Sea transit |
|---|---|---|---|
| LCL door-to-door | Australia | USD 350–450 / CBM | 4–8 weeks |
| LCL door-to-door | USA / EU | USD 400–550 / CBM | 6–12 weeks |
| 20ft full container (FCL) | Indonesia–USA | USD 2,500–4,500 | 6–12 weeks |
| 40ft full container (FCL) | Indonesia–USA | USD 4,000–7,000 | 6–12 weeks |
Indicative as of 2026 and subject to change.
Two models
Two pricing models cover almost every furniture shipment from Bali: LCL, priced per cubic metre, for one item up to a partial load; and FCL for whole-home or trade volumes.
There is no minimum. LCL starts from a single CBM, so one bedside cabinet uses the same rate card as a ten-piece living room. Every price is indicative and subject to change — and no alternate price variants are ever published.

On top of freight
Real cost and compliance factors, flagged rather than buried.
Wood over 6 mm debarked, heat-treated to a 56 °C core for 30+ minutes or methyl-bromide fumigated, and marked on two faces.
DAFF applies ISPM-15 to pallets, dunnage, crating and cases, and requires treatment plus the certification mark.
De minimis for Indonesia suspended August 2025: duties on every shipment. Lacey Act phase VII and TSCA Title VI need CBP entry, ISF, declaration.
ISPM-15 on non-EU wood packaging and tightening legality controls; Indonesian teak commonly relies on SVLK or FSC paperwork.
The arithmetic
CBM is length × width × height in metres. A large teak dining table crated for export often lands around 1–1.5 CBM; a full one-bedroom of furniture typically runs 8–15 CBM. A multi-item load is the CBM count times the per-CBM band.
Door-to-door means pickup at the Bali showroom and delivery to your address. Where FCL overtakes LCL is exactly what the trade desk models before you commit.
Worked examples · 2026
| Load | Calculation | Indicative cost |
|---|---|---|
| 3 CBM to Sydney | 3 × USD 350–450 | ~USD 1,050–1,350 |
| 6 CBM to Los Angeles | 6 × USD 400–550 | ~USD 2,400–3,300 |
| Whole home, 25+ CBM | 20ft or 40ft container | Usually beats per-CBM LCL |
At whole-home volume, ask the desk to compare LCL and FCL side by side.
Booking
Who does what
Crating is done to standard in Kerobokan, Denpasar, a recognised wood-packaging locality. Pickup, consolidation and delivery terms are commercial logistics arrangements, confirmed per booking.
Bali Furniture Shipping is an independent shipping concierge — not a carrier or licensed customs broker. Freight and clearance are arranged via vetted licensed forwarders. Part of Juara Holding Group, a Bali-based Indonesian group operating across Indonesia since 2015.
FAQ
Talk to the desk
Tell the trade desk what you are shipping and where. An itemised, no-obligation quote follows within 24 business hours.