Do you pick up from any Bali showroom?

Yes. We collect from showrooms and workshops across Ubud, Seminyak, Canggu and the wider island, then cube and crate at our consolidation warehouse. Send the showroom address and your piece list with your quote request.

LCL or FCL — which is right for me?

It comes down to cubed volume. Under roughly 15 CBM, shared LCL is usually most economical; 15–28 CBM makes a 20ft container worthwhile; 28–58 CBM points to a 40ft. There is no minimum — LCL runs from 1 CBM.

Is my teak table ISPM-15 ok?

Solid-wood packaging thicker than 6 mm must be debarked, heat-treated to a 56 °C core for 30 minutes or fumigated, then IPPC-marked on two opposing faces. We build compliant crates and send photo-proof; licensed facilities carry out the treatment.

How long to Australia?

Bali to Fremantle or Sydney is the shortest lane: about 14–21 days FCL or 18–28 days LCL at sea, and roughly 4–8 weeks door-to-door once consolidation, clearance and delivery are counted. Honest day-bands, not guaranteed dates.

Teak dining set in an open Bali villa overlooking the mountains

Per-CBM · per-piece · showroom to your door

Bali Furniture Shipping, Showroom to Your Door

You bought the piece in Bali. We cube it, crate it to ISPM-15, consolidate it and deliver it to your door in Australia, the USA or Europe.

Cube my piece Get a quote

1 CBM LCL floor — no minimum order
Showroom pickup across Bali
ISPM-15 heat-treated export crates
Photo-proof packing before it sails

The Cubing Bench

Cube your piece before anyone quotes

Pick a preset or enter L×W×H in centimetres. The bench adds an 18% ISPM-15 crate allowance, totals your consignment and names the mode you fall into — never a dollar figure.

01 · Pick a preset piece

02 · Or measure it yourself (cm)

Length Width Height

Solid wood thicker than 6 mm (needs an ISPM-15 crate)

03 · Destination region

Consolidated gross volume

0.00 CBM

Shipping mode: Add a piece to begin
Crate class: —
Sea transit band: —

Pieces on this consignment

No pieces yet — pick a preset or measure one, then add it.

Send worksheet to the desk

Cube, crate class, mode and transit band only — every figure indicative and confirmed on quote.

Per-CBM rate ledger · transit board

The rates most forwarders won’t publish

Indicative LCL bands, door-to-door, from a single cubic metre. Sea-transit day-bands from Benoa and Surabaya — honest ranges, never fake dates.

Sydney Harbour with the Opera House and Harbour Bridge

Bali → Australia

Benoa / Surabaya → Fremantle / Sydney

LCL per CBM: USD 350–450
Minimum: 1 CBM
LCL at sea: 18–28 days
FCL at sea: 14–21 days

Shortest lane — about 4–8 weeks door-to-door.

Lane details

Port of Los Angeles cranes at dusk behind a palm-lined waterfront

Bali → USA

Benoa / Surabaya → Los Angeles / New York

LCL per CBM: USD 400–550
Minimum: 1 CBM
LCL at sea: 30–45 days
FCL at sea: 28–40 days

New York sits at the longer end of the band.

Lane details

Container ship berthed under gantry cranes in Rotterdam

Bali → Europe

Benoa / Surabaya → Rotterdam / Felixstowe

LCL per CBM: USD 400–550
Minimum: 1 CBM
LCL at sea: 32–48 days
FCL at sea: 30–42 days

Suez routing; inland delivery adds to the door total.

Lane details

Filling a box instead? Indicative FCL: 20ft ~USD 2,500–4,500 · 40ft ~USD 4,000–7,000 (Indonesia–USA reference lane).

Every figure indicative, confirmed on quote · desk data as of 2026.

Stacked wooden export crates with stencilled markings

ISPM-15 crate class

Why your teak table needs a compliant crate

Solid-wood packaging entering Australia, the USA and the EU must meet the IPPC ISPM-15 standard. We build to it, and photograph every piece before the lid goes on.

Heat treatment: Core 56 °C for 30 continuous minutes
Fumigation alt.: Methyl bromide where heat-treat isn’t viable
Scope: Solid wood thicker than 6 mm
Debarked: Bark-free before treatment
IPPC mark: Stamped on two opposing vertical faces
Photo-proof: Packing images sent before it sails

Sourced to the IPPC/FAO ISPM-15 standard. We are an independent concierge, not a licensed customs broker — treatment runs through vetted, licensed facilities.

How the consignment works

Five steps, showroom to front door

Showroom pickup

We collect from any showroom or workshop — Ubud, Seminyak, Canggu and beyond — into our consolidation warehouse.
Cube & crate

Each piece is measured, wrapped and built into an ISPM-15 export crate, with photo-proof before it closes.
Consolidate

Your crates share an LCL consolidation or fill a 20ft / 40ft container — whichever your volume justifies.
Port & customs

Booking, documents and clearance run through vetted licensed forwarders. We coordinate; we don’t pretend to be the carrier.
Door delivery

Sea leg, destination clearance and final-mile delivery to your door in AU, the US or the EU — tracked throughout.